Table 4-1.
Operating Mode
AM/FM/Weather Channel
Standby
FM
AM
Weather band
Bit 93
0
0
1
1
Bit 92
0
1
0
1
Bit 63
X
0
1
1
Bit 62
X
0
1
0
4.2
Test Mode
A special test mode is implemented for final production test only. This mode is activated by set-
ting bit 9 = 1. This mode is not intended to be used in customer applications. For normal
operation, bit 9 has to be set to 0. Bit 22 to bit 30 are deactivated in normal operation mode.
Table 4-2.
Test Mode
Mode
Normal operation
Test mode
Bit 9
0
1
4.3
VCO/Local Oscillator Prescaler
An oscillator circuit is implemented to build a VCO as proposed in the application schematic. The
VCO frequency is used to generate the LO frequency of the 1 st mixer stages. The control voltage
of the VCO is usually generated by the PLL circuit U4256BM. The VCO frequency has a range
of 70 MHZ to 250 MHz to allow the reception of all analog world bands.
A main element of the implemented oscillator circuit is a bipolar NPN transistor. The internally
biased base is connected to pin 13 and the emitter to pin 14. An AGC circuit (bit 30) can be acti-
vated to increase the emitter current until the appropriate oscillation level is reached. The
fundamental emitter current can be changed by bit 52.
Table 4-3.
Local Oscillator AGC
Local Oscillator (VCO)
AGC off (default)
AGC on
Bit 30
0
1
Table 4-4.
Local Oscillator Gain
Local Oscillator (VCO)
Low Gain
High Gain
Bit 52
0
1
In addition (to the AM prescaler) a special VCO prescaler is implemented for all modes (AM, WB
and FM). The divider factor of the prescaler buffer provides the signal of the buffered output (at
pin 16) and the prescaler VCO provides the signal of the 1 st FM mixer stage and AM prescaler.
Examples of VCO prescaler settings are described in section “Application Information” on page
29 . The divider factor of the VCO and buffer prescaler can be selected according Table 4-5 on
page 7 .
6
ATR4258
4838B–AUDR–05/05
相关PDF资料
ATR7040-PVQG IC PWR AMP 5.8GHZ WDCT 16-QFN
ATREB232ED-EK AT86RF232 EVAL KIT
ATZB-900-B0 KIT MOD 802.15.4/ZIGB 900MHZ RF
AUIRF7640S2TR1 MOSFET N-CH 60V 77A DIRECTFET-S2
AUIRF7665S2TR1 MOSFET N-CH 100V 77A DIRECTFET2
AUIRFR120ZTR MOSFET N-CH 100V 8.7A DPAK
AUIRFR4105ZTR MOSFET N-CH 55V 30A DPAK
AUIRLR024NTR MOSFET N-CH 55V 17A DPAK
相关代理商/技术参数
ATR4258-ILQH19 功能描述:射频接收器 COM.RADIO - AM/FM Receiver RoHS:否 制造商:Skyworks Solutions, Inc. 类型:GPS Receiver 封装 / 箱体:QFN-24 工作频率:4.092 MHz 工作电源电压:3.3 V 封装:Reel
ATR4258-ILSH 功能描述:射频接收器 COM.RADIO - AM/FM RECEIVER RoHS:否 制造商:Skyworks Solutions, Inc. 类型:GPS Receiver 封装 / 箱体:QFN-24 工作频率:4.092 MHz 工作电源电压:3.3 V 封装:Reel
ATR4258-ILSH 19 功能描述:IC RCVR AM/FM 3WIRE BUS 44SSOP RoHS:是 类别:RF/IF 和 RFID >> RF 接收器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS 产品变化通告:Product Discontinuation 09/Jan/2012 标准包装:50 系列:* 频率:850MHz ~ 2.175GHz 灵敏度:- 数据传输率 - 最大:- 调制或协议:- 应用:* 电流 - 接收:* 数据接口:PCB,表面贴装 存储容量:- 天线连接器:PCB,表面贴装 特点:- 电源电压:4.75 V ~ 5.25 V 工作温度:0°C ~ 85°C 封装/外壳:40-WFQFN 裸露焊盘 供应商设备封装:40-TQFN-EP(6x6) 包装:托盘
ATR4258-ILSH19 功能描述:射频接收器 COM.RADIO - AM/FM Receiver RoHS:否 制造商:Skyworks Solutions, Inc. 类型:GPS Receiver 封装 / 箱体:QFN-24 工作频率:4.092 MHz 工作电源电压:3.3 V 封装:Reel
ATR4262-EK 功能描述:射频开发工具 Eval Board RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V
ATR4262M1 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:Broadcast Radio Front-end IC for AM/FM/DRM/HD Radio
ATR4262M1-PLQW 功能描述:视频 IC AM/FM Tuner IC for Digital IF RoHS:否 制造商:Fairchild Semiconductor 工作电源电压:5 V 电源电流:80 mA 最大工作温度:+ 85 C 封装 / 箱体:TSSOP-28 封装:Reel
ATR4262M3-PLQW 功能描述:视频 IC AM/FM Tuner IC for Digital IF RoHS:否 制造商:Fairchild Semiconductor 工作电源电压:5 V 电源电流:80 mA 最大工作温度:+ 85 C 封装 / 箱体:TSSOP-28 封装:Reel